Technical data

Dimensions	Thickness	Width	Length
LOSPA swiss	20 mm / ¾"	Custom-made	Custom-made

Floor prerequisites	Slit width	Tread width
	From 30 mm / 1 ¼"	Up to 140 mm / 5 ½"
		(We recommend LOSPA SB for wider treads)

The mats are made to dimension by our specialists drawing upon many years of real-world experience. Stability also plays a key role in this.
In addition to the slit and tread width in the slatted floor, feeding, aeration, occupation, etc. are essential for ensuring clean floors.

Application area
For every slatted floor geometry
Fattening cattle and young cattle in pen husbandry
KURA SB or KURA S can be used for young cattle weighing up to 250 kg (or up to 350 kg if the animals are kept in the same pen for the entire fattening/breeding period).
KURA SB
KURA S

Installation and fixing
Installation and fixing Installation instructions
The mats are fixed in the slots with special fixing elements.
KRAIBURG fixing system: Optimized rubber peg with surrounding rim: Prevents lateral slipping – flush with the mat

Compatibility with vehicle traffic
LOSPA can be driven over with common equipment such as a yard loader or tractor with approved pneumatic tyres at prescribed air pressure up to max. 4 bar.
(Note: drive with necessary caution and steer in large radii!) Vehicle traffic specifications

Maintenance tip
Keep slatted flooring as clean as possible Essential for hoof health and slip resistance!
Treatment with a high-pressure cleaner and standard cleaning agents possible.

Full covering of pens pays off!

In order to reduce injuries and enable all animals to behave fulfilling their needs we recommend full covering of the pen with rubber.

In the case of partial covering with rubber:

Lower ranking animals are easily pushed off. This is particularly true where the complete lying area cannot be used as such because the animals in the feeding place stand with their hind legs on the mats of the lying area.

Important: When feeding, the animals should stand on the mat either completely or not at all! This is also important for long-term functionality.

Planning aid for feeding place depth:

Pre-fattening: ca. 1.70 m
Fattening: ca. 1.80 m
Finishing: ca. 1.90 m

The dimensions may vary depending on the breed.

Fattening bull in a pen with LOSPA swiss rubber slat mats

Fattening bulls in pens with LOSPA swiss rubber slat mats

Hoof on LOSPA swiss slatted rubber flooring

LOSPA swiss slatted flooring made of rubber: reinforced Grip surface for higher loads

Custom-fit LOSPA swiss rubber mat on slatted floor

LOSPA swiss custom-made slatted rubber flooring: schematic drawing

KRAIBURG warranty
5 years
Detailed information on our warranty (with consideration of the service life) is available upon request from your contractual partner / dealer.

Tolerances
Thickness: +3/–2 mm
Width + length: +/– 1.5% (DIN ISO 3302–1 tolerance class M4)

Please refer to the relevant KRAIBURG specifications and installation instructions, which provide valuable hints and tips.

The products featured here are exclusively intended for the demonstrated applications. Technical details subject to change. Our General Terms and Conditions apply. Legal basis is the German version of the document.

Note on imperial measurements: Our products are manufactured according to metric specifications. The imperial measurements are therefore only intended as a guide. Inaccuracies may occur due to conversion and rounding.