KARERA P walking alley mat: Technical data

Technical data

Dimensions	Thickness	Width	Length
2-sided puzzle	21 mm	95-130 cm in 5-cm increments	170 cm
		(Puzzle interlock system wide sides)
3-sided puzzle	21 mm	37.5 / 47.5 / 52.5 / 57.5 / 62.5/ 92.5 / 97.5 / 102.5 / 107.5 / 117.5 / 122.5 / 127.5 cm	170 cm
		(Puzzle interlock system wide sides and on one longitudinal side)
4-sided puzzle	21 mm	125 cm	170 cm

Application area
All paved walking areas with and without a manure removal system
Walking areas for beef cattle

Slope
Up to max. 3%

Installation and fixing
Single mats are very easy to handle. Installation instructions
Prefabricated fixing points facilitate installation.
KRAIBURG fixing system: Stable and secure, rounded and countersunk

Compatibility with vehicle traffic
KARERA P is compatible with vehicle traffic, e.g. farm yard loader or tractor with authorized pneumatic tires for recommended inflation pressure up to max. 4 bar.
(Note: Drive with the necessary caution and ensure adequately large turning radii!) Vehicle traffic specifications

Manure removal
In principle, we recommend the use of scraper facilities that are specially designed for rubber flooring. In the case of conversions, always adapt the scraper facility in consultation with the scraper manufacturer in strict accordance with the KRAIBURG guidelines for manure scrapers.
Guidelines for manure scrapers
Robot collectors must be suitable for use on rubber flooring.

Important: Check scrapers at least once a year and grind any sharp edges round!
Use robot collectors according to the specifications and check them regularly!

Maintenance tip
Keep flooring on walking areas and in milking areas as clean as possible Essential for hoof health and slip resistance!
Treatment with a high-pressure cleaner and standard cleaning agents possible.
Guidelines for cleaning milking parlor mats

KRAIBURG warranty
5 years
Detailed information on our warranty (with consideration of the service life) is available upon request from your contractual partner / dealer.

Tolerances
Thickness: +3/–2 mm
Width + length: +/– 1.5% (DIN ISO 3302–1 tolerance class M4)

Please refer to the relevant KRAIBURG specifications and installation instructions, which provide valuable hints and tips.

The products featured here are exclusively intended for the demonstrated applications. Technical details subject to change. Our General Terms and Conditions apply. Legal basis is the German version of the document.