Technical data

Dimensions (mm / cm) Thickness / Height Length Width
maxiLONGLINE (rubber flooring) ca. 3 cm 2.5 - 50 m in 10-cm increments 180 / 195 cm
      Special dimensions on request
maxiBOARD 11 cm 175 cm 13 cm
maxiSTEP 12,5 cm 175 cm 12 cm
maxiPROFIL XL (lateral lying area boundary / closure of lateral edges / coverage of joints) 8 cm 173 cm 13 cm
Dimensions (in / ft) Thickness / Height Length Width
maxiLONGLINE (rubber flooring) ca. 1 ¼" 8 ½ - 164' in 4" increments 71 / 76 ¾"
      Special dimensions on request
maxiBOARD 4 ⅜" 68 ⅞" 5 ⅛"
maxiSTEP 5" 68 ⅞" 4 ¾"
maxiPROFIL XL (lateral lying area boundary / closure of lateral edges / coverage of joints) 3 ¼" 68 ⅛" 5 ⅛"

Note: Use a 4.5 cm high maxiPROFIL in Switzerland!

Concrete surface prerequisites
Min. 3% slope
Ca. 10 cm high
Installation and fixing
maxiLONGLINE is fixed to the concrete floor together with maxiBOARD.
Fixing 7 fixings / maxiBOARD and maxiSTEP; 5 screws / maxiPROFIL XL
maxiBOX comfort deep bedded stall: system structure and dimensions: schematic illustration
maxiBOX comfort deep bedded stall: rubber brisket board in the front
maxiBOX comfort deep bedded stall: rear area with integrated drainage
maxiBOX comfort deep bedded stall: longitudinal bar as a lateral lying area boundary reduces the slippage of bedding
maxiBOX comfort deep bedded stall: U-shaped surface profiling
maxiBOX comfort deep bedded stall: U-shaped surface profiling is particularly good at keeping bedding in place
maxiBOX comfort deep bedded stall: lower side with air cushion profile for permanent softness
Cow lies comfortably in a natural position in the maxiBOX comfort deep bedded stall
Cow lies comfortably in a natural position in the maxiBOX comfort deep bedded stall
maxiBOX comfort deep bedded stall with bedding
Cow lies comfortably in a natural position in the maxiBOX comfort deep bedded stall
Cow lies comfortably in a natural position in the maxiBOX comfort deep bedded stall
Cow in deep bedded stall with POLSTA deep bedded stall cushion

KRAIBURG warranty
10 years
(Only for exclusive use as a lying area, no combination, e. g. feeding + lying)
Detailed information on our warranty (with consideration of the service life) is available upon request from your contractual partner / dealer.

Tolerances
Width + length: +/– 1.5% (DIN ISO 3302–1 tolerance class M4)

Please refer to the relevant KRAIBURG specifications and installation instructions, which provide valuable hints and tips.

The products featured here are exclusively intended for the demonstrated applications. Technical details subject to change. Our General Terms and Conditions apply. Legal basis is the German version of the document.

Note on imperial measurements: Our products are manufactured according to metric specifications. The imperial measurements are therefore only intended as a guide. Inaccuracies may occur due to conversion and rounding.