KURA CowWalk

Long travel lanes can jeopardize farm operations if proper cow traffic fails. This often concerns, for example, the way to the milking unit. KURA CowWalk mats can be installed on these long, concreted surfaces. It can be observed that cows prefer soft, hoof-friendly "rubber walkways" and walk more purposefully on them.

Ideal softness for highly frequented travel lanes
Improved cow traffic due to more purposeful walking
Animal-friendly softness and certified grip

Technical data

KURA CowWalk dimensions (lower side with studs)	Thickness	Width	Length
2-sided puzzle	24 mm	61 cm	170 cm

KURA CowWalk E dimensions (lower side with grooves)	Thickness	Width	Length
for flushing manure removal with sand lying areas
2-sided puzzle	19 mm	61 cm	170 cm

Floor prerequisites
Concrete cutout/recess: 625 mm wide (+/– 5 mm) and min. 27 mm deep (or 22 mm for type E)

IMPORTANT: A rubber lip is required to ensure satisfactory cleaning results with mobile or stationary manure removal. Please take into account that the surface of the mat may actually be a few millimeters below the level of the concrete floor.

Application area
Long travel lanes

Slope
Up to max. 3%

Installation and fixing
Single mats are very easy to handle. Installation instructions
Prefabricated fixing points facilitate installation.
KRAIBURG fixing system: Stable and secure, rounded and countersunk

Compatibility with vehicle traffic
KURA is compatible with vehicle traffic, e.g. farm yard loader or tractor with authorized pneumatic tires for recommended inflation pressure up to max. 4 bar.
(Note: Drive with the necessary caution and ensure adequately large turning radii!) Vehicle traffic specifications

Maintenance tip
Keep walking area flooring as clean as possible Essential for hoof health and slip resistance!
Treatment with a high-pressure cleaner and standard cleaning agents possible.

KRAIBURG warranty
5 years
Detailed information on our warranty (with consideration of the service life) is available upon request from your contractual partner / dealer.

Tolerances
Thickness: +3/–2 mm
Width + length: +/– 1.5% (DIN ISO 3302–1 tolerance class M4)

Please refer to the relevant KRAIBURG specifications and installation instructions, which provide valuable hints and tips.

The products featured here are exclusively intended for the demonstrated applications. Technical details subject to change. Our General Terms and Conditions apply. Legal basis is the German version of the document.

More products for your application area

profiKURA CowWalk Optimized hoof abrasion & extra slip resistance

Go to the product