Gummiwerk KRAIBURG Elastik GmbH & Co. KG
Göllstraße 8
84529 Tittmoning
Deutschland
Tel. +49 (0)8683 701-303
Fax +49 (0)8683 701-190
Comfort mats for
Animal-friendly softness, optimized grip, dry claws + fewer emissions
1) Sources: Zähner et al., 2017
2) (first calculations after Monteny Milieu Advies, August 2021: Model-based assessment of the reduction potential for
NH3-emission of the innovative solid floor KRAIBURG – profiKURA 3D, based on, among others, Zähner et al., 2017)
No complex slope concreting required!
Paved / concrete walking alleys with manure removal system
after 12 months on KURA S
(compared to concrete slatted floor)
Source: Benz, 2002
per year
Source: Eelkema et al., 2004
on KURA rubber flooring
than on concrete
Source: Platz et al., 2007
on KURA rubber flooring
= natural walking distance on pasture
Source: Platz et al., 2007
on KURA rubber flooring
than on concrete
= Cost savings of almost 2 × return to oestrus
Source: Platz et al., 2007
Source: Dolecheck, Bewley, 2018
Thickness: 15 - 75 mm
Width × length: 96 - 198 cm (in 2-cm increments) × 125 cm
You can find detailed information on this in the installation instructions and at Installation & maintenance
profiKURA 3D can be driven on with standard equipment such as farm yard loader or tractor with authorized pneumatic tyres at the recommended inflation pressure up to max. 4 bar. (Notice: drive with due care and steer in large radiuses!)
Most scraper models automatically adapt to the slope towards the walking alley centre or can be adapted in the inclination – to be checked with the manufacturer, if necessary.
In principle we recommend the use of scrapers specifically developed for rubber floors. For structural alterations it is necessary to adapt the scraper facilities in coordination with the scraper manufacturer according to the KRAIBURG guidelines for manure scrapers. Robot collectors must be suitable for use on rubber floors.
Important:
Check the scraper at least once a year and grind off the sharp edges!
KRAIBURG warranty
5 years
Detailed information about our warranty (taking into account the service life) is available on request from your contractual partner / dealer.
Tolerances
Thickness: +3/-2 mm
Width + length: +/- 1.5 % (DIN ISO 3302-1 tolerance class M4)
Please take notice of the corresponding KRAIBURG specifications and installation instructions with useful advice and tips.
The products presented here should only be used for the mentioned applications. Technical specifications are subject to alterations. All sales are subject to our General Terms and Conditions. Legal basis is the German version of the document.
Youtube video
This Video is provided by Youtube.
Our
privacy policy
applies.
Youtube video
This Video is provided by Youtube.
Our
privacy policy
applies.