Gummiwerk KRAIBURG Elastik GmbH & Co. KG
Göllstraße 8
84529 Tittmoning
Deutschland
Tel. +49 (0)8683 701-303
Fax +49 (0)8683 701-190
Gummiwerk KRAIBURG Elastik GmbH & Co. KG
Göllstraße 8
84529 Tittmoning
Deutschland
Tel. +49 (0)8683 701-303
Fax +49 (0)8683 701-190
THICKNESS:
20 mm
SURFACE:
grip, reinforced
SPECIALTY:
Reinforced surface for high stress
Increased lying comfort and better heat insulation
Fewer injuries and animal losses
Enhances weight gain / reduces the fattening period
Easy to clean and disinfect
Suitable for both new construction and renovation
on rubber
(compared to concrete slatted floors)
Source: Graunke et al., 2011
(sole and white line)
on rubber
(compared to concrete slatted floors)
Source: Graunke et al., 2011
on rubber
(compared to concrete slatted floors)
Source: Zerbe F., Mayer C., Kjaer J., 2008
than on concrete
Source: Graunke et al., 2011
to concrete
(in case of partial covering)
Source: Bahrs, 2005
Rubber mats protect the joints so that standing up and lying down can be performed in a normal way and therefore happen more frequently. This has a positive effect on feed intake. The better sure-footedness allows for behaviour fulfilling the animal’s needs and provides more well-being.
Thickness: 20 mm
Width x length: tailor-made
The mats are dimensioned by our specialists on the basis of many years‘ experience. Stability also plays an important role.
In addition to the slit and tread widths in the slatted floor, feeding, aeration, occupation density etc. are important for clean floors.
In order to reduce injuries and enable all animals to behave fulfilling their needs we recommend full covering of the pen with rubber.
In the case of partial covering with rubber:
Lower ranking animals are easily pushed off. This is particularly true where the complete lying area cannot be used as such because the animals in the feeding place stand with their hind legs on the mats of the lying area.
IMPORTANT:
When feeding, the animals should stand on the mat either completely or not at all! This is also important for
long-term functionality.
You can find more details on this in our criteria for covering fully slatted pens
You can find detailed information on this in the installation instructions and at Installation & maintenance
KRAIBURG warranty
5 years
Detailed information about our warranty (taking into account the service life) is available on request from your contractual partner / dealer.
Tolerances
Thickness: +3/-2 mm
Width + length: +/- 1.5 % (DIN ISO 3302-1 tolerance class M4)
Please take notice of the corresponding KRAIBURG specifications and installation instructions with useful advice and tips.
The products presented here should only be used for the mentioned applications. Technical specifications are subject to alterations. All sales are subject to our General Terms and Conditions. Legal basis is the German version of the document.
50 % FEWER FINDINGS
