LENTA

THICKNESS:
ca. 3 cm

LOWER SIDE:
double-structured stud profile

COMFORT:
installation video

Robustness and comfort

For tying stalls and elevated feed stalls

  • Softness through double-structured stud profile
  • High dimensional stability
  • Integrated soft slope to rear edge promotes drying off
  • Dirt barriers minimize soiling underneath the mat
  • Robust and comfortable
  • For better sure-footedness
  • Easy to clean and disinfect
  • Easy to install

By the way:

Elevated feed stalls also contribute to reduce ammonia emissions!

Dimensions

Thickness: ca. 3 cm

Width × length: 
100 cm × 150/157/165/175/185 cm 
110 cm × 150/157/165/175/185/200 cm
120/130 cm × 150/157/165/175/185/200/220 cm

Accessories:
  • KK-Poly-T-Bar for covering joint widths of 4 - 8 cm (e. g. with mushroom dividers or very fine litter) or closure at side edges

    Width: 13 cm, length: 165/180 cm

KRAIBURG Stallmatten: einfache und schnelle Montage

Installation – easy and safe
  • fixing at the front edge

You can find detailed information on this in the installation instructions and at Installation & maintenance

KRAIBURG warranty 

10 years
Detailed information about our warranty (taking into account the service life) is available on request from your contractual partner / dealer.

Tolerances

Width + length: +/- 1.5 % (DIN ISO 3302-1 tolerance class M4)

KRAIBURG Pflegetipp Liegematten

Tips for maintenance
  • With use as lying mats: spread a small amount of litter on them
    › e.g. soft milled straw or mineral material
    (moisture in the lying area, among other things, plays a major role in the development of skin diseases and infections)
  • With use as mats for elevated feed stalls: keep them as clean as possible
    › Important for claw health and slip resistance!
  • Treatment with a high-pressure cleaner, as well as with standard cleaning agents is possible

KRAIBURG Info Icon

You can find more information about litter here:

Effect of litter quality on lying times

Joint health – comparing different bedding materials

You can find more information about elevated feed stalls here:

Standing comfort & elevated feed stalls

Please take notice of the corresponding KRAIBURG specifications and installation instructions with useful advice and tips.

The products presented here should only be used for the mentioned applications. Technical specifications are subject to alterations. All sales are subject to our General Terms and Conditions. Legal basis is the German version of the document.

That´s what our customers say:

Cows stand softly and cleanly
Cows stand softly and cleanly
18.11.2020

“Using LENTA on the elevated feed stalls has given the cows a soft floor on which they can stand well. The mats are also very easy to keep clean.”

LENTA

THICKNESS:
ca. 3 cm

LOWER SIDE:
double-structured stud profile

COMFORT:
installation video

Robustness and comfort

For tying stalls and elevated feed stalls

  • Softness through double-structured stud profile
  • High dimensional stability
  • Integrated soft slope to rear edge promotes drying off
  • Dirt barriers minimize soiling underneath the mat
  • Robust and comfortable
  • For better sure-footedness
  • Easy to clean and disinfect
  • Easy to install

By the way:

Elevated feed stalls also contribute to reduce ammonia emissions!

Dimensions

Thickness: ca. 3 cm

Width × length: 
100 cm × 150/157/165/175/185 cm 
110 cm × 150/157/165/175/185/200 cm
120/130 cm × 150/157/165/175/185/200/220 cm

Accessories:
  • KK-Poly-T-Bar for covering joint widths of 4 - 8 cm (e. g. with mushroom dividers or very fine litter) or closure at side edges

    Width: 13 cm, length: 165/180 cm

KRAIBURG Stallmatten: einfache und schnelle Montage

Installation – easy and safe
  • fixing at the front edge

You can find detailed information on this in the installation instructions and at Installation & maintenance

KRAIBURG warranty 

10 years
Detailed information about our warranty (taking into account the service life) is available on request from your contractual partner / dealer.

Tolerances

Width + length: +/- 1.5 % (DIN ISO 3302-1 tolerance class M4)

KRAIBURG Pflegetipp Liegematten

Tips for maintenance
  • With use as lying mats: spread a small amount of litter on them
    › e.g. soft milled straw or mineral material
    (moisture in the lying area, among other things, plays a major role in the development of skin diseases and infections)
  • With use as mats for elevated feed stalls: keep them as clean as possible
    › Important for claw health and slip resistance!
  • Treatment with a high-pressure cleaner, as well as with standard cleaning agents is possible

KRAIBURG Info Icon

You can find more information about litter here:

Effect of litter quality on lying times

Joint health – comparing different bedding materials

You can find more information about elevated feed stalls here:

Standing comfort & elevated feed stalls

Please take notice of the corresponding KRAIBURG specifications and installation instructions with useful advice and tips.

The products presented here should only be used for the mentioned applications. Technical specifications are subject to alterations. All sales are subject to our General Terms and Conditions. Legal basis is the German version of the document.

That´s what our customers say:

Cows stand softly and cleanly
Cows stand softly and cleanly
18.11.2020

“Using LENTA on the elevated feed stalls has given the cows a soft floor on which they can stand well. The mats are also very easy to keep clean.”