Gummiwerk KRAIBURG Elastik GmbH & Co. KG
Göllstraße 8
84529 Tittmoning
Deutschland
Tel. +49 (0)8683 701-303
Fax +49 (0)8683 701-190
Gummiwerk KRAIBURG Elastik GmbH & Co. KG
Göllstraße 8
84529 Tittmoning
Deutschland
Tel. +49 (0)8683 701-303
Fax +49 (0)8683 701-190
THICKNESS:
ca. 6 cm / ca. 7 cm
3-LAYER COMPOSITION
Our softest ones offer excellent lying comfort
3-layer composition: ideal and permanent softness for every load condition
Soft lying area within the mat edges supports the correct resting position of the cow and improves slip resistance
Proven pebbled surface
Integrated soft slope to rear edge promotes drying off
Chamfer at the rear edge: gentle on animal joints, no stumbling edge
Sealing lips completely surround the foam inlay and the lower mat, the foam is protected
Soft and stable
The extra easy to install one
suitable for cantilever dividers only
The classic since 2004
suitable for cantilever dividers and mushroom dividers
The jointless one
suitable for cantilever dividers only
after 15 months on KEW Plus
(previously mattress system)
Source: Mathis, 2006
per cow per day
(compared to hard rubber mat)
Source: LfL Sachsen, 1999
per cow per year
(compared to classic deep litter cubicle with straw)
Source: Heidenreich, 2007
Thickness: ca. 6 cm
Width (adjustable with connecting bar) × length:
115/120/125/130 cm × 183 cm
120/125/130 cm × 192 cm
You can find detailed information on this in the installation instructions and at Installation & maintenance
You can find detailed information on this in the installation instructions and at Installation & maintenance
Thickness: ca. 7 cm
consists of:
KEW LongLine (top covering):
Thickness: 15 mm
Width × Length: 180 cm × 2.5 - 25 m (in 10-cm increments)
KRAI-PUR (foam):
Thickness: 20 mm
Width × Length: 120 cm × 200 cm
KEW Cup (cup-formed lower mat):
Thickness: 35 mm
Width × Length: 120 cm × 167 cm
You can find detailed information on this in the installation instructions and at Installation & maintenance
KRAIBURG warranty
Rubber: 10 years, foam: 5 years
(Only for exclusive use as cubicle cover, no combinations, e.g. feeding + lying.)
Detailed information about our warranty (taking into account the service life) is available on request from your contractual partner / dealer.
Tolerances
Width + length: +/- 1.5 % (DIN ISO 3302-1 tolerance class M4)
Please take notice of the corresponding KRAIBURG specifications and installation instructions with useful advice and tips.
The products presented here should only be used for the mentioned applications. Technical specifications are subject to alterations. All sales are subject to our General Terms and Conditions. Legal basis is the German version of the document.
MEHR GESUNDE GELENKE
74 % FEWER INJURIES
Ø 85 % LESS STRAW